What size washers do I need for washers game?

What size washers do I need for washers game?

Usually metal or plastic, washers are thin, disk-shaped plates that have a hole in the middle. The size varies, but game pieces are typically two to two-and-a-half inches in diameter with a one inch hole in the middle. Most games use four washers per team – although some variations use three – for a total of eight.

How far apart are the holes in the game of washers?

The game field consists of two washer pits, each containing one recessed cup of 4 inches in diameter. The distance from the cup centers is 25 feet. Each player throws three washers toward the opposite cup.

What happens if you go over 21 in washers?

The first player or team to reach no more and no less than 21 points wins the game! The round must be complete. If a score exceeds 21 points a penalty is incurred. If you go over 21 points your score is reduced by the number of points you scored to cause you to exceed 21.

What are the dimensions for washer boards?

Official 3 Hole Washer Board Dimensions: Regulation board size is 12 inches wide by 48 inches long. However, there are variations available out there that range in size from 12″ wide by 32″ long to 16″ wide by 48″ long.

How do you play hillbilly horseshoes?

Player Turns

1. The player or team to score last (no matter if the throw is cancelled. or not) throws first in the next round.
2. A round consists of a player making three washer throws in a row as. one turn, and then an opposing player making three washer throws in. a row as the second turn. Thus, a round consists of two turns.

What are the dimensions of a washer toss box?

Washer pits and boxes vary in size and shape, but a standard for one-hole washers is 16 by 16 by 4 inches (410 mm × 410 mm × 100 mm), with a cylindrically-shaped cup ( 41⁄2 in [110 mm] in diameter and 5 in [130 mm] in height) located in its upper surface.

How do you make a washer box game?

DIY Washer Toss Game Set Instructions

1. four 16-inch 2x4s.
2. four 13-inch 2x4s.
3. two 16×16-inch ½-inch-plywood squares.
4. 100-150 grit sandpaper.
5. 16 3-inch wood screws.
6. 24 1¼-inch wood screws.
7. two 4-inch-diameter PVC coupler pieces (3½-inch length)
8. two 13×13-inch squares indoor/outdoor carpet.

What is the size of the washer holes in washer game?

The hole that’s the closest carries 1 point, the one in the middle carries 3 points and the farthest one a total of 5 points. When it comes to the size of the washers, their measurements are 1”x 2 ½ “x ⅛ “. Washer game is super easy to build.

How many holes do you need to make a washing machine?

Basically, the board consists of four holes close to each corner of the board with one hole in the middle. You’ll need to use six washers per player. If a washer lands in any of the holes, that’s worth 3 points. Whoever comes closest to the middle hole earns 2 points.

How do you play the game washers?

Washers Game Breakdown. The objective of the game is to earn points by throwing small pieces of metal called “washers” into a hole. The washers usually have 2” in diameter and the hole is denoted by a PVC pipe (a.k.a. the cooter) or a can. Sometimes you might even see players tossing washers towards a box.

What is the hole in a washing machine called?

The washers usually have 2” in diameter and the hole is denoted by a PVC pipe (a.k.a. the cooter) or a can. Sometimes you might even see players tossing washers towards a box.