What is the use of decking sheet?
Decking sheet constitutes an efficient and durable floor deck alternative, given their ribs, embossment, and capabilities to easily bind with the concrete slab and blend to form a part of the floor structure.
What is deck sheet?
Decking Sheets are flat surfaces or platforms capable of supporting flooring and roofing sheets and these are connected to the outer or inner part of building structure. These sheets are very helpful in reducing the concentrated loading effect of roofing on the building structures by proper distribution of load.
What is composite deck slab?
The term ‘composite steel deck floor slab’ means that there is a provision in the system for bonding between the steel deck and the concrete by some mechanical means. In other words, for the steel deck and concrete to act compositely, a mechanical interlocking is needed.
What is the cost of decking pan?
Re: DECKING PAN VS ORDINARY DECKING Decking pan is about $24-$25 a square foot and is self supporting.
Why deck slab is used?
#1 – Less Weight: Slabs made with steel decking have high structural strength compared to traditional concrete slabs. This creates a high strength-to-weight ratio which allows for a massive weight reduction.
How thick is metal decking?
Metal decking is most commonly 16, 18, 20, and 22 Gauge in thickness.
What is decking sheet made of?
Metal Decking Sheets are made up of metals like stainless steel, aluminum, zinc galvanized steel and are widely used as the strong and durable platforms for floors, roofs etc.
What is deck in construction?
DECKS. (1) DEFINITIONS. (A) Deck: Any structure which serves as a raised horizontal platform on floor constructed of wood or other materials, without enclosing walls or roofs.
What is the difference between composite and non-composite floor deck?
Unlike composite deck, selection of non-composite deck is not determined by the uniform load being supported, since in a non-composite application the deck is only used as a form for the concrete and not for positive reinforcement. the clear span is short.
How thick is a composite floor?
It is 1.5” Deep, 3′ Wide Panel. It allows for normal weight concrete slab thicknesses of between 3.5” to 7.5”. This type of panel is used in short span conditions.
How thick is pan decking?
WestPro supplies pan decking at 20 gauge thickness and 1.5 inches, 2 inches, or 3 inches tall. The alternative to pan decking for suspended concrete slabs is to frame the concrete in with 2×4 wood slabs, then remove the wood after the concrete sets.
What is the width of a decking pan?
Floor Decking Specs The 1.5 inch deck comes in a standard 36″ width (unlike the 2″ & 3″, which come in a standard 24″ wide panel). The designer of most projects will specify what material type the floor deck should be for each particular job, but the composite deck is sold primarily in the G-6o galvanized.