What is the difference between Osmo top oil and polyx?

What is the difference between Osmo top oil and polyx?

All three are very similar, with the only significant difference being the amount of solvent. Top Oil contains more solvent, and is supposedly optimized for furniture and countertops (as opposed to floors). Polyx Pro Oil contains virtually no solvent, for situations that call for a very low-VOC finish.

What is Osmo polyx oil used for?

Osmo Polyx Oil enables wood surfaces to retain their natural character and beauty for longer. By perfectly combining the benefits of both oils and waxes it provides a hard wearing, durable and reliable finish for flooring and furniture.

Is Osmo polyx waterproof?

OSMO Polyx-Oil 2K Features: Once cured it’s highly water resistant. It is very environmentally friendly with low VOC’s (Volatile Organic Compounds) Doesn’t stink up and drive you out of your home like some finishes will.

Does Osmo Polyx Oil darken wood?

A clear oil such as Osmo Polyx Oil will maintain the natural appearance, but will darken the wood again, much like when you wipe water over bare wood, it will enhance and enrich the woods natural tones.

Can you wax over Osmo polyx?

Osmo Polyx Oil is the original hard wax oil a combination of natural oils and waxes for use on almost any interior project. Hard Wax Oil is almost as hard as a varnish but easier to repair. All you need is a rag apply the oil over the affected areas without having to remove any previous finish.

Can you polish Osmo Polyx?

When thoroughly dry, surface can be buffed or polished with hand polisher or buffing machine. The only difference in applying the Clear Extra Thin is to let it sit for 30 minutes before wiping away any excess.

Does Osmo polyx oil yellow?

But, you can add a second coat once first coat as dried. I don’t think the pictures really do it justice, it really looks yellow and cheap. I’ve added two coats already. My fear is that if I add a polyx pigmented coat on top it will eventually wear through exposing the none pigmented coats beneath.

Can you polish Osmo polyx?

How long does Osmo polyx take to dry?

Allow to dry for approx. 8-10 hours under good ven- tilation. After drying, quickly apply a second coat also thinly. When renovating or recoating an already oiled sur- face, one coat applied to the clean and dry surface is usually sufficient.

Is Osmo 3032 food Safe?

Polyx-Oil is Osmo’s main flooring finish. 3032 Satin is the most widely used finish. Osmo Polyx-Oils are a clear, durable, low maintenance, food safe oil and wax combination for interior timber flooring, as well as timber furniture including baby’s cots, bassinets and playpens.

Should you sand between coats of Osmo?

Sanding is not necessary between coats. However, de-nibbing with a pad may help to reduce any imperfections from the surface between each coat.

What is the texture of Osmo POLYX®-oil?

It is of a creamy consistence (thixotropic). The satin-matt (3032) or matt (3062) sheen can be intensified by slight polishing. Grain and texture of the wood are accentuated. A wooden floor which has been treated with Osmo Polyx®-Oil The original Hardwax Oil will become more beautiful and valuable with age.

Can you use Osmo POLYX on wood floors?

Osmo Polyx®-Oil The original Hardwax Oil is a professional, clear, satin-matt (3032) or matt (3062) floor finish for all wooden floors (solid wood floors, laminated flooring, oriented strand-board etc.). Can also be used on cork floors and for terracotta and other unglazed tiles.

How many coats of Hardwax do you put on Osmo?

Osmo Polyx®-Oil The original Hardwax Oil is very easy to apply: Only two thin coats no primer!). It is of a creamy consistence (thixotropic). The satin-matt (3032) or matt (3062) sheen can be intensified by slight polishing.

What are Osmo oils and how do they work?

Recommended for use on furniture, interior joinery and flooring, Osmo oils enhance the natural beauty of wood. When dry these oils are safe for humans, animals and plants and can be used on children’s toys as per EN71.3. The finish on the oil accentuates the natural colour and tone of the timber, leaving a slight sheen on the surface.