What is a Lutron Grafik Eye?
GRAFIK Eye® QS is a customizable preset lighting control system that allows you to adjust lights and shades for any task. GRAFIK Eye QS helps you save energy, as well as meet the aesthetic, functional, and regulatory needs of any project or space.
What is QS homework?
HomeWorks QS is a whole house lighting control system offering control of internal & external lighting and natural daylight with ultra-quiet electric blinds and curtains. Lutron lighting control is an industry leader.
What is a Lutron QSM?
The QS Sensor Module (QSM) is a ceiling-mounted device that integrates Lutron wireless and wired sensors and controls through the QS communication link to Energi Savr Node (ESN) units, GRAFIK Eye QS control units, Quantum systems, myRoom control modules, and Sivoia QS shades / draperies.
What is Lutron EcoSystem?
EcoSystem is an end-to-end digital lighting control solution from Lutron. It’s complemented by 80,000+ fixture options from 350+ OEMs globally. The solution is comprised of high- performance ballasts and LED drivers, simple wired and wireless controls, superior sensors, and intuitive user interfaces.
How do you reset Lutron homework?
Reset Factory Default performs the same function as a triple-tap, hold, triple-tap (see page 6). To access the Maintenance screen, hold the ON and OFF buttons down simultaneously for 10 seconds, then release. Restoring the Dynamic Keypad to factory settings will remove it from the system and will clear its programming.
How do I program my ra2 radio?
To set up a RadioRA® 2 system, components must be added to the Main Repeater. First, add Auxiliary Repeater(s)*; then add all other system devices. Press and hold the Add button on the Main Repeater for 3 seconds until the green Add LED begins to rapid-flash (ten times per second) and the Repeater beeps.
Why is homework called homework?
In 1905, an Italian teacher named Roberto Nevilis invented the concept of “homework.” Originally, its purpose was to be used as a punishment for students who were lazy in class or for those who were disobedient or rude to their teacher. This practice became popular and became more frequently used around the world.
What is Qslink?
QS Link wiring is the wiring going between devices which allows them to communicate. It consists of 4 wires plus a drain. The length of the QS link will determine the wire gauge for terminals 1 and 2. ALL 4 WIRES ARE POLARITY SENSITIVE. The QS Link must be wired per the submittal drawings.
How do I reset my Lutron QSM?
To reset and redetect wired inputs press and hold “Program” button for 10 seconds. Note: First, there will be a long beep after 3 seconds. Continue to hold until the second long beep after 10 seconds. QSM will power up and new configuration of wired input devices will be detected after valid signals are received.
What is eco dimming?
over a standard switch† By limiting the maximum power delivered to. light bulbs, eco-dim dimmers save energy. and can extend incandescent and halogen. bulb life by three times or more.