How often should I clean my Paslode nail gun?
Paslode recommend that you clean and lubricate your nailer every 50,000 shots. If it’s being used in a dirty environment or at high nailing rates for extended periods of time then this should be more often. Cleaning your nail gun is easy and shouldn’t take any longer than 15 minutes.
What can I use to clean my nail gun?
Remove debris and carbon deposits with a lint-free cloth or compressed air – this may have to be repeated to remove stubborn carbon deposits. When clean apply the oil lubricant placing a few drops around the cylinder wall and then manually move the piston driver up and down to evenly distribute the lubricant.
What can I use instead of Paslode oil?
1: Brake cleaner The brake part cleaner you use on your truck also works nearly as well as the Paslode cleaner and is the best Paslode degreaser cleaner alternative.
How often should I oil my nail gun?
Pneumatic Tools To break down deposits and ensure smooth starts and stops, most pneumatic nailers and staplers require a total of 4-5 drops of pneumatic tool oil into the air fitting every day, adjusting for the amount of use.
Why is my Paslode nail gun misfiring?
Misfiring is the most common repair that we conduct. Possible causes for a Paslode nail gun not firing are: A nail jam is stopping the nails from moving forward. The gas fuel cell is empty, out-of-date or not attached properly.
Can you use WD40 on a Paslode?
wd40 just clogs everything up. the paslode cleaner is just the same as brake part cleaner that you would use on your car. you can get it cheaper than paslode cleaner at your local motor factors. spray it all over to remove old oil and dust ,leave for 5 mins and re-oil.
Can you use WD40 in a Paslode gun?
Can I use WD40 on my nail gun?
Never use WD40, motor oil, transmission fluid or aerosol lubricants. Many generic lubricants eat through rubber over time, which will cause more harm than help in the long run (remember most pneumatic nail guns have rubber o-rings).
Can you use WD40 on Paslode nail gun?
How do you fix a nail gun that won’t fire?
My Nailer Won’t Fire – Troubleshooting Common Causes of Jams and Misfires
- Clear Jams.
- Inspect Your Air Supply.
- Reload the Magazine.
- Clean the Tool.
- Replace Seals and O-Rings.
- Inspect for Damage.
- Take It to the Service Center.
What causes a nail gun to not fire?
First, make sure the correct air pressure is being used, you have the proper nail gauge and length installed, and that you don’t have any air leaks from your hose. Also, make sure your nailer has been properly cleaned and maintained according to the company that manufactured it.
How to clean a Paslode Nailer?
PASLODE 013690 NAILER CLEANING KIT This must have cleaning kit is the perfect partner for your impulse and pulsa cordless tools. Compatible with IM90, IM360, IM100, PPN50, PPN35, PPN50, IM350, IM45, IM65, IM50, P800 Safe for internal electronical components. Cleans and dries quickly. Plastice safe. Extends part life. Kit contains: 300ml Tool
How to service a Paslode framing gun?
Paslode nail gun repair manual –other Paslode pneumatic framing nailer troubleshooting guidelines. Paslode pneumatic framing nailer won’t fire at all-A nail jam may be preventing the fasteners from moving forward (clear the jam), its fuel cell may be out-of-date (replace) or not attached properly (fix this), or even empty (refill).
How to troubleshoot a Porter Cable for a finishing nailer?
The nailer is not being held down with enough pressure when the nailer is fired.
How to lubricate finish Nailer?
Oil should be added to the gun’s moving parts and the fitting at the bottom of the tool. Proper lubrication will keep the tool running smoothly. If the nail gun will be used all day long, oil may need to be reapplied throughout the day. Be sure to also apply oil to the air fitting each day (about 4-5 drops).