How do you set up PPPoE on Xbox 360?

How do you set up PPPoE on Xbox 360?

1. Under Configure Network, select the Additional Settings tab.
2. Select PPPoE settings.
3. Select User Name, enter the PPPoE user name, then select Done.
4. Select Password, enter the PPPoE password, then select Done.
5. Select Service Name, enter the PPPoE service name, select Done, and then select Done.

How do I fix my Xbox 360 network error?

To do this:

1. Turn off your Xbox 360 console and your network hardware (such as your modem and router).
2. Wait 30 seconds.
3. Turn on your modem and wait for it to come online (approximately one minute).
4. Turn on the next piece of hardware (for example, your router) and wait another minute.
5. Restart your Xbox console.

Why is Xbox 360 not connecting to WIFI?

Unplug the power cord from the back of the modem. After one minute, plug the modem back in and wait for all the lights to return to their normal state. Turn on the Xbox 360 console. Test your Xbox Live connection again (Settings > System Settings > Network Settings > Wired Network > Test Xbox Live Connection).

Why won’t my Xbox 360 Obtain an IP address?

An incorrect password might make it look like your console is connected to your wireless network, but your console will not receive an IP address. On your console, press the Guide button on your controller, go to Settings, and select System Settings. Select Network Settings.

How do I connect my Xbox 360 to my wireless network?

What to Know

1. Connect the appropriate wireless network adapter to the console.
2. Turn on your Xbox 360 and select the Settings pane from the home page. Choose System > Network Settings.
3. Select your wireless network, enter your password, and select Done. Your Xbox will test the connection. Select Continue to finish setup.

How do I reset my Xbox 360 network settings?

How to restore network settings to factory defaults

1. Press the Guide button  on your controller.
2. Go to Settings and select System Settings.
3. Select Network Settings.
4. Choose your connected network.
5. Select Test Xbox Live Connection.
6. After the test has finished, select Configure Network.

What Ethernet cable do I need for Xbox 360?

Follow these steps to get your Xbox 360 wired to your home network. Ethernet cables enable high-speed wired Internet connections. Be sure the Ethernet cable that you purchase is a CAT-5, CAT-5e, or Cat-6 and the appropriate length. The cable needs to reach from the back of your console to your network port or router.

Why won’t my Xbox 360 connect to the Internet with an Ethernet cable?

Unplug the Ethernet cable from both the Xbox and the networking device (your modem, router, or gateway). Use a different network cable to connect your Xbox console and the networking device. Test your Xbox Live connection again (Settings > System Settings > Network Settings > Wired Network > Test Xbox Live Connection).