How do you create a spring water source?
A spring can be developed into a drinking water supply by collecting the discharged water using tile or pipe and running the water into some type of sanitary storage tank. Protecting the spring from surface contamination is essential during all phases of spring development.
How do I know if I have an underground spring?
Observe the ground as you step looking for water to seep up as it would if you squeezed a sponge. If the ground is muddy, consistently wet, or has pools of water without any natural explanation of their source you may have an underground spring.
How do you divert water from underground springs?
To divert an underground spring you will need to create a french drain to draw water away from the spring. Before digging, call your utility company to map your buried utility lines. Then, dig a sloped trench around your property and fill it with a base layer of gravel, and several inches of course sand.
Can you make a spring fed pond?
Spring-fed ponds may not require any surface runoff to keep them full, meaning they will be clear, clean and cold. Using spring water to fill your pond may trigger permit requirements in some locations, but it is the ideal source of water for a farm pond.
What do you do with an underground spring in your yard?
Unfortunately, if you have a water spring on your property, it may cause flooding in your yard or basement. To stop a water spring from discharging into your yard, install a subsurface linear French drain to capture and divert the water before it becomes a nuisance.
What does underground spring look like?
The oversaturation may be a sign of an underground spring. Observe the ground as you step looking for water to seep up as it would if you squeezed a sponge. If the ground is muddy, consistently wet, or has pools of water without any natural explanation of their source you may have an underground spring.
How do you get rid of underground water?
Installing a surface drainage system around the perimeter of the basement floor. This method channels water from the walls to a drain or sump for removal. Relieving water pressure against walls and the floor. Some form of drainage is necessary when cracks occur because of water pressure.