How do I reset my SpeedTouch 585 v6?

How do I reset my SpeedTouch 585 v6?

Make sure the SpeedTouch™ is turned on. LED lights red – this will take about 7 seconds. Release the reset button. The SpeedTouch™ restarts.

How do I hard reset my modem?

How do I factory reset my modem?

1. Locate the Reset button, protected by a pinhole at the back of your modem.
2. Grab an object such as a pen, toothpick or paperclip.
3. Push and hold down the Reset button for 10-15 seconds (no more).
4. Wait for 5-10 minutes as your modem resets itself.

How do I access my SpeedTouch router?

Open web browser and type http://192.168.1.254 or http://dsldevice.lan in to the address bar. Press Enter. 2. Enter the username Administrator and the DSL password.

How do I reset my fizz modem?

You can reset the Fizz modem to factory settings by pressing and holding for 20 seconds the small button at the back of your modem, with a pen or a paperclip. The default admin username : cusadmin, and the password is your Wi-Fi password.

How do I setup my modem after resetting?

Power on your cable modem. Insert a straightened paper clip into the Reset button, and press and hold for about seven seconds until all LEDs blink. Release the Reset button. Your cable modem’s configuration is reset to factory default settings.

What is speedtouch modem?

SpeedTouch Home. A modem which provides bridged and PPTP connections for Internet connectivity. The modem uses an Ethernet cable to connect to a PC, or may be connected to a router that supports PPPoE.

Why is my fizz data not working?

Restart your phone Reboot (power cycle) your phone by holding down the phone’s start button for 10 seconds. Following your reboot, your applications will load. Your phone will then re-authenticate to the Fizz mobile network and potentially recover its authorization to access the network.

Why my fizz Internet is not working?

Unplug the power cable on your Wi-Fi modem. Once it’s unplugged, make sure all the lights on the modem turn off. Wait ten (10) seconds. Plug your modem back in.

What happens if I factory reset my modem?

A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.

What is speedtouch USB?

The Speedtouch 330 (previously known as the Speedtouch USB) is a basic dial-up high speed winmodem. In the United Kingdom, these modems are usually supplied by Internet broadband providers such as Karoo, Orange, Onetel and Tiscali.

Who makes smart RG router?

Adtran’s suite of residential CPE includes our latest Wi-Fi 5/6 service delivery gateways, SmartRG gateways, and Mesh Wi-Fi.

How do I set up SpeedTouch?

In the Access Controls window leave the username as Administrator and enter the DSL Password in the two password fields You will now see a Confirmation Page. Click Start You will now have to wait as the SpeedTouch configures itself. You will see a window asking you to do so.

How do I reset my modem to factory settings?

Connect the modem to power and reset it to the original factory configuration by holding the reset button for 15 seconds.. ADSL VPI / VCI will be different from the required 0.35 Gateway and configuration server are 192.168.1.254

Why does my st516 DSL modem go up and down every 5 minutes?

If you have a ST516 DSL modem connected to a router, it is best if the router’s idle timeout feature (if it has one) be disabled. Otherwise your DSL connection may go up and down every five minutes.

Why does my DSL modem go up and down every 5 minutes?

If you have a ST516 DSL modem connected to a router, it is best if the router’s idle timeout feature (if it has one) be disabled. Otherwise your DSL connection may go up and down every five minutes. To see if you have the problem, log into the NCF StartPage and then click on the link Your recent DSL use.