How do I configure VLAN on HP switch?

How do I configure VLAN on HP switch?

To configure basic VLAN settings:

1. Enter system view, use the command: system view.
2. Create VLANs, use the command: vlan { vlan-id1 [ to vlan-id2 ] | all }
3. Enter VLAN view, use the command: vlan vlan-id.
4. Configure a name for the VLAN, use the command: name text.
5. Configure the description of the VLAN, use the command:

How do I set up voice VLAN on HP ProCurve switch?

Create voice Vlan such as Vlan 3 and configure the ports that will be connected to phones as “tagged” in Vlan 3. Add the voice parameter to make it a voice Vlan. Assign an ip address to voice Vlan 3. Use the CLI in the HP ProCurve switch and issue the ip helper-address command on the Voice Vlan in the switch.

How do I configure an interface VLAN on Aruba switch?

Creating and Updating VLANs

1. Navigate to the Configuration > Network > VLANs page.
2. Click Add a VLAN to create a new VLAN.
3. In the VLAN ID field, enter a valid VLAN ID.
4. To add physical ports to the VLAN, select Port.
5. (Optional) Click the Wired AAA Profile drop-down list to assign an AAA profile to a VLAN.

What is primary VLAN in HP ProCurve?

The primary VLAN is the VLAN the switch uses to run and manage these features and data. In the factory-default configuration, the switch designates the default VLAN (DEFAULT_VLAN) as the primary VLAN. However, to provide more control in your network, you can designate another VLAN as primary.

How do I configure my HP switch interface?

To configure the management Ethernet interface follow the steps given below:

1. Enter system view and use the command.
2. Enter management Ethernet interface view and use the command.
3. Change the description of the interface and use the command.
4. Shut down the interface and use the command.

How do you set up a voice VLAN?

1. How to Configure Voice VLAN?

1. Create a VLAN on the switch and add interfaces to the VLAN to implement Layer 2 interworking.
2. Configure the OUI to match the source MAC address of the received packet.
3. Configure the voice VLAN function on the interface.

What is the voice VLAN?

The voice VLAN feature enables access ports to carry IP voice traffic from an IP phone. When the switch is connected to a Cisco 7960 IP Phone, the phone sends voice traffic with Layer 3 IP precedence and Layer 2 class of service (CoS) values, which are both set to 5 by default.

How do I create a VLAN interface?

How-to Bring Up a VLAN Interface Assigned to a LAN Ethernet Port That Has an Up/down Status

1. The VLAN must exist and be active in the VLAN database.
2. At least one switched port in the VLAN (access or trunk) must be up.
3. That port must be in the STP forwarding state.

Which VLAN do all switch ports belong to by default?

VLAN 1
Cisco switches always have VLAN 1 as the default VLAN, which is needed for many protocol communication between switches like spanning-tree protocol for instance. You can’t change or even delete the default VLAN, it is mandatory.

Which VLAN is the default VLAN used to configure all switches from the factory?

VLAN1 is one of the factory default VLANs. Cisco Discovery Protocol (CDP) and VTP advertisements are sent on VLAN1. The switch must be in VTP server mode or transparent mode to create, add, or delete VLANs.

What is a ProCurve 5400zl switch?

The ProCurve Series 5400zl Switches include the Switch 5406zl, 5412zl and their bundles, the Switch 5406zxl-48G and Switch 5412zl-96G. They are multi- port modular switches that provide Layer 3 routing features, and that feature low latency for high-speed networking.

How many VLANs can be configured in the menu interface?

The Menuinterface enables configuration and display of port-based VLANs only. The CLI configures and displays port-based and protocol-based VLANs. In the factory default state, the switch is enabled for up to 256 VLANs, all ports belong to the default primary VLAN and are in the same broadcast/multicast domain.

Why is my ProCurve switch zl Module not working?

Either the module is faulty, or it is a new module type that is not yet supported by the operating code on the switch. As ProCurve Networking introduces new modul es for your ProCurve Switch zl, you may have to update the switch with new operating code that supports the new module.

How do I change the port configuration on my series 5400zl switch?

Use the switch console, the web browser interface, or ProCurve Manager to modify the port configuration. ■Check the port configuration. A port on your Series 5400zl Switch may not be operating as you expect becaus e it has been put into a “blocking” state by Spanning Tree, GVRP (automatic VLANs), or LACP (automatic trunking).