How do I rebalance my Maytag Bravo washer?
Place a 4-foot level across the front top of the washer. Adjust the front legs if necessary until the front is in balance. Loosen the retaining nut with the adjustable wrench and turn the feet as necessary until the front balances. Tighten the nut with the adjustable wrench.
Why does my Maytag washer keep going off balance?
Common solutions for: Maytag ob – Off Balance Washer vibration can occur if one or more of the shock absorbers is broken or worn out. Check the absorbers to be sure they are installed correctly and in the right position. Sometimes when a washer is moved the shock absorbers separate and have to be put back together.
What causes a Maytag washer to shake violently?
Common solutions for: Maytag Washer vibrating or shaking. One or more of the shock absorbers might be broken or worn out. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake.
Why does my washing machine keep going off balance?
Laundry caught below the tub or between the agitator and the inner tub can cause the washer to operate off balance with every load. The problem can be anything: a penny that worked its way out of a pocket, a button that fell off a shirt or a wayward sock or other article of clothing.
How do you balance a top loader washing machine?
Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.
Why does my top loading washing machine shake violently?
Your washing machine needs to stand level and balanced on its feet to function properly. An unbalanced appliance will vibrate and shake during operation. Try rocking the appliance from side to side or back and forth. If it’s rocking a lot, your flooring or appliance’s feet may be uneven.
How do you recalibrate a Maytag washer?
The easiest way to reset a Maytag washer is to disconnect the power to the washing machine for three minutes. Disconnecting the power allows the electrical charge to dissipate from the washing machine, which allows it to reset. If the reset fails, unplug the washer again, this time leaving it unplugged for ten minutes.
What are some common problems with Maytag washers?
Incoming Power Problem. Washing machine troubleshooting is one of the most common complaints that plagues appliance owners.
Is Maytag a good washing machine?
– Option to dry machine and door to prevent musty smell – Automatically adds the correct amount of detergent – Can wash and dry a small load – Door gasket, drawer, hose and other parts are treated to prevent germ growth
How do you fix a Maytag washer?
Set the dial to its standard or normal position,facing up at 12 o’clock.
How do you reset a Maytag Bravos washer?
Press the “Power/Cancel” button.