What is the offset of Hummer H2 wheels?
This Hummer H2 wheel has 8 lug holes and a bolt pattern of 165.1mm. The offset of this Hummer H2 rim is 18mm.
What offset is 4.5 backspacing?
Backspacing to Offset Conversion Chart
| Back- spacing | 3.25 in. | 4.5 in. |
|---|---|---|
| Wheel Width | Offset (mm) | |
| 5.5 in. | 0 | 32 |
| 6.0 in. | -6.4 | 25 |
| 6.5 in. | -12 | 19 |
What is the backspacing on rims?
Backspacing is the easiest to understand. It is simply the distance from the back of the mounting pad to the back lip of the wheel. It is measured by laying the wheel on its face, placing a straight edge across the wheel, and then measuring down to mounting face.
What offset is 4.75 backspacing?
So 4.75″ back space would be a deviation from 4.5″ in the amount of . 25, which equates to -6 mm, or -6 offset (negative because we are bringing the mounting surface in, not out).
What size are Hummer H2 rims?
Hummer H2 2004 6.0i
| Tire | Rim | |
|---|---|---|
| 315/70R17 120R | 8.5Jx17 ET18 | 2.7 |
| 34×12.50R17LT 10PR | 8.5Jx17 ET18 | 2.7 |
| 34×12.50R18LT | 8.5Jx18 ET15 | 2.9 |
| 35×13.50R20LT 10PR | 9Jx20 ET10 | 3 |
What size tires come on a Hummer H2?
| 2004 Hummer H2 | ||
|---|---|---|
| Rim Size | Tire Sizes | Hummer H2 Options |
| 17-Inch | 315-70-17 | Base |
What is a 40mm wheel offset?
With the declared positive offset of 40, the wheel’s mounting pad is located 40mm from the center line, towards wheel’s front face, being 40mm from the center line position which is at 88.9mm.
What does 5 inch backspacing mean?
5 inches refers to the distance between the inner flange and outer flange. Next, divide the width in inches by 2 to find the centerline. The width of this wheel is 9.5 inches, so its centerline is at 4.75 inches. Then, subtract the centerline value from the backspace value to find your offset in inches (5.25-4.75=. 5).
How do I know what backspacing I need?
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is backspace.
What is negative 44 offset?
A negative offset gives an inset or deep-dish look: -44 is deeper than -12. The wheel will also stick out from the truck. Keep in mind that some states require fender flares to cover the width of the wheel and tire.
How much offset is 5 backspacing?
Important to note is that an 8″ wide rim at 5″ of backspacing has 12mm of offset,the same 8″ wide rim with 6″ of backspacing has 38mm of offset.
What size tires are on a 2004 Hummer H2?
LT315/70R172004 HUMMER H2 / Tire size