How do I fix error code 5b00 on my Canon printer?

How do I fix error code 5b00 on my Canon printer?

How to fix Canon printer error 5b00

1. Step 1: Unplug the device.
2. Step 2: Press down and continue to hold the power button of the printer and plug the power cord into the wall socket.
3. Step 3: Hold the power button until the printer starts resetting itself.
4. Step 4: Wait for the green power light in the printer to turn off.

How do you reset the waste ink absorber is full?

Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.

How do I clear a Canon printer error?

Reset the Canon printer

1. Switch on the printer.
2. Press and hold the Stop/reset button.
3. Press the button that you use to make a color copy and hold it down.
4. Wait 5 seconds.
5. The printer now reboots and sets itself up.
6. Does the printer indicate that the device needs to be calibrated?
7. You’ve reset your printer.

How do I reset my Canon mg2540s?

Instead, you simply need to override the empty error message that is being displayed by holding down the “stop / reset” button on the printer for around five seconds. The printer should continue printing, and use any of the remaining ink in the cartridge.

How do I get my Canon printer to recognize refilled cartridges?

Quick Fix: The first thing you can do is remove the cartridge and try re-installing it to see if the printer will recognise it, if it will still not recognise the cartridge then simply hold down the stop button (this is the button with the triangle inside a circle) for a minimum of 7 seconds.

What does it mean when my Canon printer says the ink absorber is almost full?

When the message “Ink absorber full.” is displayed, the printer stops printing and needs ink absorber replacement. Push the power button to turn OFF the printer, and then contact the service center for replacement. Request either Canon or the dealer you purchased the machine for a repair service.

How do I reset my Canon e470 printer?

Follow the procedure below to initialize the printer settings.

1. Make sure that the printer is turned on.
2. Press and hold the Stop button until the Alarm lamp flashes 21 times.
3. Release the Stop button. All the printer settings are initialized.

How do I reset my Canon e470 ink absorber full?

2 Answers

1. Make sure the printer is turned off.
2. Press and hold the Resume button (triangle inside a circle).
3. Whilst it is held down, hold down the Power button.
4. Keep the Power button held down.
5. Release the Power button.

What does P mean on Canon printer?

Paper is jammed or there is an object inside the printer.