How do I reset my Sony soundbar subwoofer?

How do I reset my Sony soundbar subwoofer?

Reset the system.

1. Press the Power button to turn on the soundbar.
2. Press and hold the Power button while pressing the Input button and the VOL- button (at the same time).
3. When RESET appears on the front panel display, release the buttons.
4. Unplug the power cord for 30 seconds.

Why is there no sound coming out of my Sony sound bar?

Make sure that the setting for Control for HDMI or BRAVIA Sync of your TV and audio device is set to ON. Make sure that the ARC feature of your audio device is set to ON or AUTO. Make sure that your audio device is set to the TV input. Change the TV audio output setting to PCM and check whether the sound is output.

How do I pair my Sony subwoofer to my soundbar?

Press the ‘LINK’ button on the back of the subwoofer. Wait until the power indicator is flashing orange, then hold down the ‘CLEAR AUDIO+’ button for 5 seconds. The subwoofer’s indicator light should be solid orange. If this is the case, the system has reset and the soundbar and subwoofer should connect.

Why is my Sony subwoofer not working?

Unplug the AC power cord of the subwoofer, and then plug it in again after one minute. Right after turning on the subwoofer, set the link settings between the Soundbar speaker and the subwoofer again. For how to set the link refer to the product manual. If the issue still occurs, reset or reinitialise the Soundbar.

How do I connect my Sony soundbar to my Sony TV?

1. Connect one end of the HDMI cable (sold separately) to the HDMI IN port on your TV.
2. Connect the other end to the TV OUT (ARC) port on your sound bar.
3. Then, connect an optical audio cable from the TV’s Optical digital audio out to OPTICAL IN on your sound bar (this is necessary to hear the TV audio).

Is it better to connect Soundbar with HDMI or Optical?

To begin with, HDMI ARC is the best choice if you want the absolute best audio quality possible. It supports all the latest audio formats, and lets you use the same remote for all devices. Moreover, it helps you eliminate tangled cables and clutter. On the other hand, optical cables still offer decent sound quality.

How do I setup my Sony subwoofer?

1. Connect one end of the audio cable (supplied) to the Wireless Transceiver.
2. Connect the other end of the audio cable to the AUDIO OUT.
3. Connect the Wireless Transceiver to a USB port of the TV.
4. Place the Wireless Subwoofer as close as possible to the TV, and plug the subwoofer to an AC outlet.