What can cause a Kenmore dryer not to start?
Common solutions for: Kenmore Dryer won’t start
- Thermal Fuse. The thermal fuse is a safety device designed to protect the dryer from overheating.
- Start Switch. To determine if the start switch is defective, attempt to start the dryer.
- Door Switch.
- Drive Motor.
- Belt Switch.
- Drive Belt.
- Incoming Power Problem.
- Main Control Board.
Is there a reset button on my Kenmore dryer?
If you want to reset your Kenmore Dryer and want to learn if there is a reset button on your Kenmore Dryer, Unfortunately, the answer is that there is no reset button on a Kenmore Dryer. First, find the two circuit breakers for the dryer and reset them by flipping them on and off two to three times.
What would cause a dryer to not turn on?
Common dryer issues include a faulty door switch or start switch and control problems such as a broken dryer timer or faulty electronic control board: Problems with the door switch can prevent the dryer from starting.
When I press the start button on my dryer nothing happens?
If the dryer start switch does not have continuity when it is activated, it will need to be replaced. The door switch is located near the dryer door and is activated when the door is closed. If the door switch fails, the dryer won’t start at all. Most door switches will make an audible click when they are activated.
Does my Kenmore dryer have a fuse?
Some Kenmore dryers – those with solid state controllers – will also have a small fuse on the printed circuit board to protect the solid state components against current surges and short circuits. If the machine does not run at all, the problem may be a blown control fuse.
How do I reset my Kenmore dryer?
Throw the dryer’s circuit breaker switch to the “Off” position; leave the switch in this position for approximately five minutes. Restore the electricity to your Kenmore clothes dryer by flipping the appropriate breaker switch to the “On” position.
Where are the fuses located on a Kenmore dryer?
To access the Kenmore dryer thermal fuse, disconnect the exhaust duct from the dryer’s outlet and remove the rear panel. The thermal fuse is a rectangular component near the Kenmore heating element with wiring terminals on each end, reveals Appliance Repair.