What is a Bushnell Yardage Pro?

What is a Bushnell Yardage Pro?

The Bushnell Yardage Pro Scout is the world’s smallest and most advanced laser rangefinder. Using Digital Technology and measuring a mere 1.5x4x2. 75 inches and weighing 6.8 ounces, the Yardage Pro Scout delivers superb and accurate range performance to +/- one yard.

How do I calibrate my Bushnell Yardage Pro?

Why is My Bushnell Rangefinder Not Showing Yardage

1. All you need are these simple steps:
2. Turn off your device.
3. Remove any lens caps from front.
4. Point the range finder at an object at least 50 yards away.
5. Press and hold down both buttons until the word “Calibrating” appears on the screen.

How do you use Bushnell Yardage Pro?

Aim the BUSHNELL YARDAGE PRO at a target at least 20 yards away, depress and hold the power button down until range reading is displayed. Release the power button. Note: Once activated, the BUSHNELL YARDAGE PRO’s LCD will remain active and display the last distance measurement for 30 seconds.

How do I change my Bushnell from meters to yards?

The unit of measure indicators are located in the upper right portion of the LCD. To select between yards and meters, look through the monocular, depress the “mode” button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds.

How do I get moisture out of my rangefinder?

Put it in a container of uncooked rice for a day. It will dry it out completely.

How do I reset my Bushnell rangefinder?

– Hold down the bottom left-hand button and power button together for 15 seconds or until the unit switches off then turn it back on using power button. This will reboot the device and it will no longer be frozen. – The device is relatively sensitive to being “properly ejected” after being plugged into a computer.

How do I change my Bushnell Pro XE from meters to yards?

Press Power/ Fire to select your preferred display brightness setting. 6. Press Mode to cycle Yards/Meters distance units preference. This also previews the Jolt indications (vibration+display indicator ring).

How do you change Bushnell Tour V3 to yards?

The TOUR V3 can be used to measure distances in yards or meters. The unit of measure indicators are located in the lower right portion of the LCD. To select between yards and meters, press and hold the POWER/FIRE button.

How long does it take to charge a Bushnell Golf watch?

First, be sure the battery has a full charge. If you are using it for the first time, it should be charged until full (takes around 2.5 hours for a full charge). Next, make sure you are outdoors, in a location with a clear view of the sky overhead, to ensure good reception of GPS satellite signals.