What amps does EL84 use?
EL84 tubes can be found on Vox AC30s and AC15s along with some smaller Marshall amps such as the DSL combo series. When pushed, EL84 amps can have plenty of bite, although some designs may feel a bit too harsh or stiff for certain players.
How many watts is an EL84?
Originally designed for the output stages of audio frequency amplifiers, the EL84 can deliver up to 17 watts. Although it is physically smaller than most common output tubes, this pentode tube can really deliver. In many ways it is similar to the EL34 but without the output “horse power”.
Is EL84 the same as 6V6?
Nontheless they are interchangable. Agreed, the EL84 and 6V6 are less similar than these, but you can build an amp that can run on either type. Some decades ago I build some guitar amps that have sockets for both. Sure, there is a difference in gain, so you turn the volume knob a bit.
What tubes are interchangeable with EL84?
The EL84 is smaller and more sensitive than the octal 6V6 that was widely used around the world until the 1960s. An interchangeable North American type is the 6BQ5 (the RETMA tube designation name for the EL84).
What is the difference between EL34 and EL84?
The EL34 is larger and it puts out two to three times the wattage as the EL84. More watts equals more volume, more headroom, and a better frequency response — even at low volumes. Lower bass frequencies require more power, and the higher wattage of the EL34 is better able to handle the full frequency spectrum.
What does a EL84 tube do?
Tungsol 7189 – The EL84/6BQ5 is an amazing audio tube. It was designed to work in many applications but not for very high voltages. These tubes are happy when provided plate voltages are in the 300 volt range. To reach their rated output of 12 watts they generally run with high current and get hot.
Can I use 6v6 instead of EL84?
Yes, the socket change is a fairly major operation, but the 6V6s are pretty compatible with the EL84 voltage and output impedance.
Can you replace an EL34 with EL84?
In the specific case of swapping an EL34 for an EL84, you actually can’t swap them because the two different tubes have a different number of pins on their sockets.
What tubes are compatible with EL84?
An interchangeable North American type is the 6BQ5 (the RETMA tube designation name for the EL84). The EL84 was developed to eliminate the need for a driver tube in radios, so it has rather more gain than is usual in a power pentode….
| EL84 | |
|---|---|
| Service | Audio |
| Socket connections | |
| B9A (Noval) |