What is Error 350 hp fax?

What is Error 350 hp fax?

The remote machine failed to respond to a fax command from the local machine because the connection was interrupted. These errors can occur if the phone lines in the area to be faxed are old or there is noise (static on the phone line). Other reasons can include power outages and other power-related problems.

Why won’t my HP printer send a fax?

Check the fax connection Check for phone line connection issues that might cause fax receiving to fail. Confirm the fax cords are in the correct ports: The phone line should be connected to the 1-LINE port and the answering machine, if used, should be connected to the 2-EXT port on the back of the printer.

What does communication error mean on a HP fax machine?

error (Communication error): Check for poor line conditions and resend when conditions improve. If available, try sending the fax through another wall jack and make sure you are using the phone cord that shipped with the fax machine.

How do I fix the error on my fax machine?

‘Comm. Error’ message when faxing

1. Press HOOK and verify the quality of the dial tone.
2. Check the telephone line connection.
3. Once the telephone line is plugged directly from the jack labeled LINE on the Brother machine to the wall jack, try to resend the fax.

What is Error 344 hp fax?

The error code means that The remote machine has failed to respond to a fax command from the local machine because the connection is interrupted. If you’ve successfully sent faxes to this number before, then you can reattempt the fax transmission at a different time when line condition have improved.

What causes fax transmission errors?

Causes of Transmission Errors Phone line noise and data flowing through telephone lines at a low signal strength or speed causes fax transmission errors, not the fax machines themselves.

How do I reset my HP fax machine?

Reset the printer or fax to clear any stuck fax jobs or problems related to the printer faxing hardware.

1. Disconnect the power cord from the machine.
2. Wait 60 seconds.
3. Reconnect the power cord and wait for the printer/fax machine to fully start up and become idle. note:
4. Try to fax again:

How do I set up my HP printer to fax?

Go to File, then Print, and Printer to select the printer output. You will be presented with several options, but you will select the one that has “Fax” in the name. Click Print, which will open a new Send Fax window. Enter the fax number you wish to send the document to, and update the settings.

How do I fix the communication error on my HP printer?

Click Printers and Scanners, Print and Scan, or Print and Fax. Right-click the blank space in the Printers list, and then click Reset printing system. Click Reset in the confirmation window. Enter an administrator username and password, and then click OK.

How do I fix a communication error on my printer?

Rebooting System

1. Simply turn off your PC or laptop device.
2. Remove and disconnect all USB connections.
3. After waiting for 3-5 minutes.
4. Turn on your PC and connect it to the Epson printer using the USB cable.
5. Many times, this system reboot solves the “Epson printer communication error”.

How do you check a fax number?

Send a one page black and white text fax to 1-888-hpfaxme (1-888-473-2963). When your fax is received by the HP Test Fax Service, we will generate a return fax to you within five minutes confirming that we received your fax. This verifies that you can both send and receive a fax with your fax machine.

What does poor line condition on a fax mean?

“Poor Line Condition” or “NG” are messages that may appear on the Transmission Verification (TVR) report if a fax transmission fails. There are several reasons why a fax transmission may fail, but these two errors are typically related to interference, static, or noise on your phone line.