What is Schnuerle scavenging?

What is Schnuerle scavenging?

Schnuerle scavenging (sometimes called “loop scavenging” or “reverse scavenging”) is a design used by most modern valveless two-stroke engines. The key difference compared to crossflow scavenging is that the transfer ports are located either side of the exhaust port and aimed at the opposite cylinder wall.

What is porting 2 stroke engine?

Porting refers to the process of enlarging and shaping the intake, exhaust, and transfer ports around the cylinder of your 2-stroke engine.

What is the use of transfer port?

Transfer Port: The transfer port is located inside the engine, it is used for transferring the charge from the crankcase to the cylinder head portion through the descending piston.

What is piston ported?

Piston port is a common configuration found in two stroke engines. In this configuration, the fuel:air mixture enters the engine through the intake port behind the the piston, proceeding to the crankcase, where it is then forced through the transfer ports into the cylinder to be burnt.

What is a Strato engine?

Introduced in 1998, our state-of-the-art Strato-Charged® engines are designed with advanced technology that reduces impact on the environment through efficient engine design, increased fuel economy and reduced emissions.

What are the three methods of scavenging?

Abstract: The process of simultaneously purging exhaust gas and filling the cylinder with fresh charge for a new cycle is referred to as scavenging. The main scavenging methods are cross scavenging, loop scavenging and uniflow scavenging.

How do you increase RPM on a 2 stroke?

How to make a 2 stroke more powerful

1. Consider reed valve for more horsepower.
2. Reduce the Squish gap.
3. Down jet the engine.
4. Inspect your exhaust system.
5. Work on your intake.
6. Get the cylinder ported.
7. Check the Ignition timing.
8. Make your exhaust system stinger ID smaller.

How many valves does a 2 stroke engine have?

Standard uniflow-scavenged two-strokes have intake ports that are controlled by the piston and four valves in the cylinder head that are used to manage the exhaust flow.

What is 2 stroke IC engine?

A two-stroke (or two-stroke cycle) engine is a type of internal combustion engine that completes a power cycle with two strokes (up and down movements) of the piston during one power cycle, this power cycle being completed in one revolution of the crankshaft.

What is the advantage of rotary valve engines?

The rotary valve combustion engine possesses several significant advantages over the conventional assemblies, including significantly higher compression ratios and rpm, meaning more power, a much more compact and light-weight cylinder head, and reduced complexity, meaning higher reliability and lower cost.

What is Schnuerle flow?

Schnuerle flow was termed “reverse loop scavenging”. As the first of these was realised to be inaccurate, the later form adopted the simpler name. These original terms are now obsolete and no longer used. The system is named after its inventor, Adolf Schnürle.

What is the origin of the German word Schnuerle?

The system is named after its inventor, Adolf Schnürle. Either “Schnürle” or the more common Anglicisation as “Schnuerle” are generally acceptable. It also appears as “Schnürrle”, but “Schneurle” is a misspelling. Adolf Schnürle was a prolific engineer and is named on many patent documents.

Who invented the Schnürle transfer port?

In 1926, the German engineer Adolf Schnürle developed the system of ports that bears his name. The ports were relocated to both be on the same side of the cylinder, with the transfer port being split into two angled ports, one on either side of the exhaust port.

What is Schnuerle porting?

Schnuerle porting is a system to improve efficiency of a valveless two-stroke engine by giving better scavenging. The intake and exhaust ports cut in the cylinder wall are shaped to give a more efficient transfer of intake and exhaust gases.

https://www.youtube.com/watch?v=UbTtSS_lFSU